Produkty dla z kołnierzem (76)

NC vices can be used for a wide range of clamping tasks: Repeat accuracy ≤0.01 mm Fixed jaw locked in all directions (X,Y,Z) Vertical use directly on the machine table Wide clamping range by using attachment step jaws Can be laid on the side, with fastening holes for slot spacing of 63 mm and 100 mm Quick pre-adjustment of the clamping range using locking pins Basic equipment includes two reversible screw-on jaws and one crank handle Reference:41091 Material:Body and jaw holder mild steel Version:Hardened and ground all sides

Hook clamps and clamping screw carbon steel, tempered. Reference:04374 Version:Black oxidised

Flange plate, piston and body rust-resistant, bright. Screws electro zinc-plated. Collet red or clear anodised. Note: Machinable collet system with base plate for mounting on 50mm pitch grid plates. The flange plate can be used for external or internal clamping collets. The contour of the workpiece to be clamped is machined into the collet. Free-form and asymmetrical contours can be clamped. The integrated spring package generates a clamping force of 5.8 kN. The clamping force can be raised to 43.5 kN by pneumatic post-clamping. The clamp is released by blowing compressed air onto the lower piston surface pushing the piston upwards and releasing the clamping force on the collet. Clamping travel 0.2 mm. Repeat accuracy < 0.01 mm. Accessory: Collet for external or internal clamping 03179 Reference:03178

Chain clamps are used mainly in machine and plant construction. Chain clamps enable cylindrical, complicated and large to very large workpieces to be clamped securely and effectively in the quickest and easiest way. Suitable for cylindrical workpieces, valve bodies, pistons etc. The workpiece surface can be protected by attaching the plastic elements. Application: The knurled nut on the clamping bracket can be used to preset the chain length and the clamping force. The required torque is set on the clamping hook. Accessory: Steel roller chains for chain clamp sets 04211-03. Steel turnbuckles for chain clamp sets 04211-06. Steel prisms for chain clamp sets 04211-09. Nuts for T-slots DIN 508 enhanced, 07060. Cap screws DIN EN ISO 4762, 07160. Note: The opening angle of the chain should not exceed 30°. Do not exceed max. permitted tightening torques. Supplied with Chain clamp set 04211-15: Clamping hook. Clamping bracket. Reference:04211

Tightening the ball-end thrust screw moves the jaw plates forwards. The workpiece is pushed against the fixed stop and simultaneously forced down onto the seating face. The seating face for the workpiece can be mounted directly on the machine table. Reference:04460 Material:Steel Version:Case-hardened and black oxidised

Vis roulée, traitée par induction à 62 ±2 HRC et polie. Ecrou rectifié, voie de roulement traitée par induction à 62 ±2 HRC et poli. Vis à billes à profil gothique avec un pas de 5 mm ou 10 mm. Simple, pas à droite. Ecrou à collerette avec filetage à billes selon DIN 69051 partie 5. Fabriquée selon la classe de précision C7 (Tolérance ±50 µ / 300 mm). Sans précontrainte avec le jeu axial P0 (max. 0,08 mm). Nous fabriquons des vis à billes selon vos besoins sur la base d'un schéma détaillé. Longueur de fabrication maximale 5600 mm. D'autres classes de précision et de précontrainte disponibles (voir renseignements techniques). L'écrou à collerette ne doit pas être démonté de la vis sans la bague de montage pour éviter de perdre les billes. Référence:24055 Vis:acier 1.1213 Ecrou:acier 1.3505 Racleur:plastique Indication de dessin:M6 pour graisseur

Interchangeable subplates are particularly suitable for quickly exchanging fixtures on zero point clamping plates. Ground on both sides, standard clamping pin gauge of 200 mm. Complete with clamping pins and handles. On request: Further gauges and special sizes. Reference:42755 Material:High-strength aluminium

Tempered and black oxidised. Note: The pressed in plastic inserts offer optimal damage protection for sensitive workpiece faces. Reference:04370 Version:Tempered and black oxidised

It is recommended that the cam lever is in a vertical position when the collet is positioned in the bore. The function of the clamping system was tested in bores with tolerance H7. All values for retaining force are guide values and are given without safety factor. The suitability for the respective application must be checked by the user. Advantages: Two components can be joined together without tools. The components are perfectly centred in the clamped state. The compact design means that the mandrel collet with cam lever can even be used in blind holes. There are no specific dimensional requirements for the holes. Additionally, the surfaces and design do not need to have any specific properties. Functional principle: The clamping system is inserted in the hole in the open state. At the beginning of the locking process, the mandrel collet expands and clamps itself in the lower component. The integrated disc spring assembly creates a positive down force Reference:03157-15

The lateral clamping screw tightens the jaws and clamps the workpiece on the circumference. The simple and compact design allows 2 workpieces to be clamped. The clamping travel is max. 0.5 mm. The jaws must be pre-tensioned before machining the contour, the supplied clamping ring is used for this purpose. Reference:03163

We recommend using a lubricating paste to reduce wear to the adjustment screw. Risers are available to increase the height of the power clamp. Supplied with clamping element, support element, DIN 508 slot key and grade 12.9 bolt. Application: The height of the clamping arm can be infinitely adjusted using the adjustment screw and the workpiece can then be clamped. Advantages: Very high retaining forces of 22–49 kN. Low height. Simple element assembly. Enables very fast, simple clamping. Infinitely adjustable height and length. Use in 12-28 mm T-slots or M10, M12, M16, M20 grid systems. Thrust pad available in smooth and serrated versions. Reference:04629 Material:Carbon steel

Housing and arm carbon steel. Jaw tool steel. Version: Housing, black oxidised. Arm and jaw tempered and black oxidised. Reference:04575

Dimensions : 25x23 - Fil : 4.4 - Disponible en finition nickelée, zinguée, zingué irisée, laitonnée

Hauteur : 10 - Vis : 3x6 - Diamètre de tête : 6.5 - Disponible également en laiton poli verni et vieux laiton

Largeur : 90 - Disponible en finition Nickelée

Diamètre : 32 - Fil : 4.4 - Disponible en finition zinguée et vieux laiton